Induction welding equipment, flame welding equipment, chiller, automated welding

Copper tube gas collection pipe straight flame welding project

Author：Zhengzhou Daqing Automation Equipment Co., Ltd Click： Time：2025-06-03 09:26:56

Welding product introduction:

1. Gas collection pipe: Welding of copper and copper pipes

2. Specification: Based on customer drawings or actual workpieces

3. Welding time: The final welding time shall prevail

Equipment Introduction:

This equipment is a linear flame welding device, consisting of one bed frame, one module, one fixture, one flame heating welding system, and one electrical control system

One set of gas flow controller, etc.

Introduction to Welding Process:

1. Using linear flame welding equipment for product welding can achieve manual feeding, automatic welding, manual cutting, etc;

2. The worker inserts the prepared workpiece to be welded into the positioning fixture, activates the welding button, and the robot welding gun automatically moves to the programmed position to start welding. After welding is completed

The robot returns to the waiting station and executes the welding operation again after receiving the welding command. After cooling is completed, the material is manually cut, and after reloading, it works in a cyclic manner.

Welding result display:

On site equipment pictures:

Advantages of welding scheme:

1. Using imported flow meters to control the flow rate of gas and oxygen to achieve temperature control; High flow welding during welding, low flame waiting when not welding, intelligent adjustment, greatly saving gas and oxygen;

2. Our welding quality is very stable, and there is no need for people to frequently interfere and adjust the flow rate, ensuring that there is no virtual welding during welding. The product qualification rate is as high as 99.9%;

3. Can be matched with robot welding, used for production modes of small quantities and multiple batches, with high flexibility to adapt to a wide range of products, and will not cause equipment to be unusable due to market changes and process changes, resulting in low equipment utilization rate;

4. Our welding has good quality, intelligent adjustment, strong stability, and can achieve robot loading and unloading in the later stage, saving labor;

5. It can achieve automation, combined with automatic loading and unloading, automatic wire feeding or automatic loop, and can fully realize welding automation;